==== SVXLINK Installation RASPI mit BUSTER ====

  * SD-Karte (16 GByte empfohlen) mit Raspberry "Raspberry Pi OS (32-bit) Lite" vorbereiten.
    * Link: [[https://www.raspberrypi.org/downloads/raspberry-pi-os/|https://www.raspberrypi.org/downloads/raspberry-pi-os/]]

  * SSH Terminal starten

  * Grundkonfiguration
    * //**sudo apt-get upgrade**//
    * //**sudo apt-get update && sudo apt-get install g++ libsigc++-2.0-dev libgsm1-dev libpopt-dev tcl-dev libgcrypt20-dev libspeex-dev libasound2-dev make alsa-utils git cmake libqt4-dev libopus-dev opus-tools libcurl4-gnutls-dev libjsoncpp-dev**//
    * Fragen jeweils mit "Y" (bzw. "J" wenn auf deutsch installiert) beantworten
    * Dieser Vorgang dauert länger. Je nach INTERNET Zugangsgeschwindigkeit

  * User für svxlink-Echolink anlegen
    * //**sudo useradd -c 'Echolink user' -G audio -d /home/svxlink -m -s /sbin/nologin svxlink**//

  * SVXLINK Installation aus dem GITHUB
    * //**git clone https://github.com/sm0svx/svxlink.git**//
    * //**cd svxlink**//
    * //**mkdir src/build**//
    * //**cd src/build**//
    * //**cmake -DUSE_QT=OFF -DCMAKE_INSTALL_PREFIX=/usr -DSYSCONF_INSTALL_DIR=/etc -DLOCAL_STATE_DIR=/var -DCMAKE_BUILD_TYPE=Release ..**//
    * //**make**//
    * //**sudo make install**//

  * SVXLINK //**/etc/svxlink/svxlink.conf**// anpassen


  * Sound-Files
    * cd /usr/share/svxlink/sounds/
    * sudo wget https://github.com/sm0svx/svxlink-sounds-en_US-heather/releases/download/19.09/svxlink-sounds-en_US-heather-16k-19.09.tar.bz2
    * sudo tar xvjf svxlink-sounds-en_US-heather-16k-19.09.tar.bz2
    * sudo ln -s en_US-heather-16k en_US